Netgear EAX80 Setup | Nighthawk AX6000



Netgear EAX80 Setup  is intended for the next years of Wi-Fi, providing full capacity, reliability, and range. You may have a better home networking experience and extend faster Wi-Fi to the farthest section of your home with superfast connections up to 6Gbps.

How do I set up my Netgear EAX80 extender?

  • Begin by connecting the Netgear EAX80 extender into an electrical socket
  • When the led light on the EAX80 extender turns on.
  • Use any computer or mobile device and navigate to your device’s wifi settings.
  • You must connect to the “Netgear_ext” network there.
  • After connecting to the WIFI extender. Launch any web browser.
  • In the address bar, type
  • You have arrived at the Nighthawk new extender configuration page.
  • Follow the on-screen instructions to connect your booster to your wireless router or modem.
  • Connect your phone or computer to the Netgear EAX80 extender.


How to log in to Netgear EAX80

  • Open an internet browser on any mobile device or computer that is connected to your Netgear eax80 ax6000 network.
  • Enter into the website area of your web browser.
  • Tap the Enter button.
  • When asked, provide the admin username and password.
  • Select LOG IN.
  • If your internet browser displays the Menu button, click it.
  • Select the Settings option to access it and adjust the Netgear extender setup.

Netgear Nighthawk EAX80 Guide

The Netgear  EAX80 WIFI  extender has WIFI rates of up to 6Gbps. In your workplace or at home, you may enjoy speedy online gaming, flawless HD streaming, and delayed audio streaming.

You’ve arrived at the right site if you don’t know how to set up the Netgear EAX80 Nighthawk AX6000  extender. You can learn how to fully configure your Netgear AX6000 extender here.

Netgear EAX80 Extender Setup Manually

We’ll go through what to do next when you’re on the Netgear EAX80 setup page and want to connect the extender to your wireless router or modem.

Step-by-step instructions for creating an account and connecting the EAX80 to your home wifi network.

  • When you arrive at Select the EAX80 new extender configuration option.
  • You will now be sent to a website where you can create an account. Complete all of the essential fields.
  • And then select “Continue.” It will now ask you how you want to configure the Netgear AX600 WIFI mesh extender.
  • Select one of the options and press the “NEXT” key.
  • Your EAX80 WIFI  AX6000 is now looking for a wifi router.
  • Your home wifi network name should now appear on the list.
  • Select your home WIFI name by selecting the radio option and then tapping “NEXT.”
  • Enter your home router password and press the “Continue” button.
  • Please wait for your repeater and router to communicate for around 2-3 minutes.

Note : Do not unplug or switch off the booster while it is being configured.

Your Nighthawk has been successfully linked to your home system.


 Netgear EAX80 Setup | WPS 

Is the above-mentioned Netgear EAX80 setting method problematic for you?

Don’t be scared! Use the WPS technique for Netgear extender setup. The following are the steps for mounting your Netgear Nighthawk  AX6000 WiFi extender using the WPS button:

  • Turn on  Netgear AX6000  extender.
  • Using an Ethernet wire, connect your EAX80 extender to your router.
  • Click the WPS button on your extension.
  • Then, on your router, press the WPS button.
  • Set your extender’s LED to  green right now.

Installing a Netgear EAX80 Extender through

To set up a new extender using, follow the instructions below:

  • The WiFi Extender Setup must be connected and turned on.
  • Connect your PC to the Extender connection now.
  • Navigate to the mywifiext website in your browser.
  • The option for New Extender Setup will then appear.
  • To finish the Netgear extender setup, follow the on-screen directions


Netgear EAX80 Extender  | Firmware Update

  • Open any web browser on a computer or mobile device connected to the Netgear EAX80  connection.
  • You must now log in to one of these sites:
  • For Windows, use mywifiext or For Apple, Linux, or IOS, use . 
  • The Android system makes use of your Netgear’s IP address.
  • Enter your admin ID and password, then click the LOGIN button.
  • Tap on the Menu option if it appears in the browser.
  • Select Firmware Update from the menu.
  • Select “Check Online” from the drop-down menu.
  • If a new update is available, complete all of the procedures to upgrade the firmware on your Netgear EAX80  extender.

Troubleshooting steps :

  • When you connect your computer or mobile device to the Netgear AX6000 EAX80, make sure the Customer Link light on the Netgear extender goes white.
  • If you can’t really remember your ID or password, select “Username & Password Help.”
  • If your internet browser displays an error page, enter “http://” in the website bar of your internet browser by typing .
  • If your Netgear ax6000 is configured but cannot connect to the main Wi-Fi network, check that the Client Link light is turned off.
  • If your WiFi connection is unstable, use any Ethernet cable to connect your PC to the Netgear ax6000 eax80 extender.

Installation of Netgear EAX80 using Mywifiext Login Page

It is recommended that the extender be linked to each user’s Wi-Fi device.

Open your PC device, launch network management, and then connect to the Netgear_ext SSID.

  • To start with the setup, you must first launch one of your chosen online browsers.
  • In the address bar, type
  • After that, press the “Enter” key.
  • You’ve been sent to Netgear’s official Wi-Fi extender login page.
  • At this point, you will be requested to provide the username and password for the extender network.
  • However, users will be unable to access the log-in page if their extender is not connected to their computer. As a result, all users must connect their extenders to the PC.
  • Users who do not currently have a Netgear extender account must create one before proceeding with the setup process using mywifiext.
  • As a result, after configuring or logging into the Netgear extender network, you should click “Next.”


Congratulations! You have successfully completed the mywifiext Netgear EAX80 Wifi Extender Setup. As a consequence, you may now place your extension wherever you like. Connect it to the Netgear ext (SSID) for easy, uninterrupted internet connectivity.

Reset on Netgear EAX80 Extender

To reset the netgear WIFI extender setup  follow the steps given below:

  • Switch on your extender , the LED lights will turn green in colour.
  • Now to stabilise LED lights  on your extender  , this will take at least 5 minutes Detect your extender’s reset button.
  • Using an item of a similar size, press and hold the reset button for up to 10 seconds to cause the LED light to blink.
  • At least 5 minutes will pass while the LED lights on your extension are stabilising. and Mywifiext.local are the same words, so if you are still having issues, you may verify your default login IP address, call us at our toll-free number, or chat online with one of our professionals.


Leave a Reply

Your email address will not be published. Required fields are marked *